丹尼尔斯大厦 加拿大多伦多

正多伦多大学丹尼尔斯建筑、景观和设计学院的设计采用了分期的方法,包括修复和扩建以前称为"知识学院"的标志性建筑,将现有建筑物改造成与教学和需求更相关的框架体系。这个十九世纪遗址的总体规划是通过对预期用途模式和场地生态的分析而制定的,目的是重新定位校园西南角与安大略湖的轴线,并为学院创造新的特性。丹尼尔斯建筑、景观和设计学院需要一个可持续发展的新型工     

Computer‐aided design methodology for linearity enhancement of multiwatt GaN HEMT amplifiers using multiple parallel devices

This article presents a design methodology for linearizing GaN HEMT amplifiers based on splitting a large FET into multiple parallel FETs with same total gate periphery and by biasing them individually. By varying the biases, the magnitude and the phase of the IMD3 components at the output of FET changes. A detailed simulation methodology using commercial microwave CAD software is presented. Simulation results show that by biasing one device in Class AB and other(s) in deep Class AB mode, IMD3 components of parallel FETs can be made out of phase to each other leading to cancellation and improvement in linearity. Three prototype circuits were simulated using (a) a single 5 mm FET (1 × 5 mm), (b) two parallel 2.5 mm FETs (2 × 2.5 mm), and (c) four parallel 1.25 mm FETs (4 × 1.25 mm), for a total gate periphery of 5 mm, over the frequency range of 0.8 to 1.0 GHz. IMD3 improvement up to 20 dBc was achieved with the 4 × 1.25 mm circuit when the FET biases were optimized. Measurement results show improvement in linearity up to 20 dBc for 4 × 1.25 mm circuit. The proposed method improves linearity without a substantial penalty on the power consumption and is straightforward to implement.     

Infiltration behavior of Cu and Ti fillers into Ti2AlC/Ti3AlC2 composites during tungsten inert gas (TIG)brazing

Herein we study the infiltration behavior of Ti and Cu fillers into a Ti₂AlC/Ti₃AlC₂MAX phase composites using a TIG-brazing process. The microstructures of the interfaces were investigated by scanning electron microscopy and energy dispersive spectrometry. When Ti₂AlC/Ti₃AlC₂ comes into contact with molten Ti, it starts decomposing into TiC_x, a Ti-richandTi₃AlC; when in contact with molten Cu, the resulting phases are Ti₂Al(Cu)C, Cu(Al), AlCu₂Ti and TiC. In the presence of Cu at approximately 1630 °C, a defective Ti₂Al(Cu)C phase was formed having a P63/mmc structure. Ti₃AlC₂ MAX phase was completely decomposed in presence of Cu or Ti filler-materials. The decomposition of Ti₂AlC to Ti₃AlC₂ was observed in the heat-affected zone of the composite. Notably, no cracks were observed during TIG-brazing of Ti₂AlC/Ti₃AlC₂ composite with Ti or Cu filler materials.     

Analyzing the determinants of carbon emissions from transportation in European countries: the role of renewable energy and urbanization

Clean Technologies and Environmental Policy - The continuous growth of transport sector and the increase in carbon emissions from transportation attract the attention of policy makers in...     

Design and Analysis of New Micromixers Based on Distillation Column Trays

Four passive micromixer designs (G1, G2, G3, and G4) based on distillation columns trays are proposed. The performance of the devices is assessed by numerical simulations. The mixing performance is investigated for different Reynolds numbers and channel heights for oil/ethanol flow. G1 and G4 designs provided a high mixing index. The G1 device achieved superior mixing performance with a moderate pressure drop due to the induced flow recirculation pattern for a relatively high flow rate, highlighting the potential use of such microdevice for scale-up and numbering-up of microdevices in modular chemical plant processing.     

Stability analysis of the particle dynamics in bat algorithm: standard and modified versions

Stability and convergence analysis have been previously accomplished for some population-based search and swarm intelligence algorithms like Particle Swarm Optimization and Gravitational Search Algorithm. However, there is no adequate theoretical analysis for Bat Algorithm (BA) in the literature. The BA is a type of optimization algorithms which is inspired by the motion of small bats searching for hunting their preys. In this study, stability and convergence of the particle dynamics in the standard version BA are analyzed, and some restrictions are described. Then, new updating relations have been proposed. Also the dynamics of the algorithm have been investigated, and sufficient conditions for stability have been derived using Lyapunov stability analysis. Extensive simulation is used to examine the findings. The results confirm the theoretical predictions and indicate the stability and convergence of the proposed updating relations.

     

Access point selection in the network of Internet of things (IoT) considering the strategic behavior of the things and users

The Journal of Supercomputing - With the expansion in the use of IoT, increasing the efficiency of these networks has become even more significant. Objects need reliable communications at suitable...     

Elliptical slot based polarization insensitive compact and flexible chipless RFID tag

A miniaturized, polarization insensitive, and fully passive chipless radio frequency identification tag is proposed in this research article. The realized tag is based on slotted elliptical structures in a nested loop fashion with identical lengths and widths of slot resonators. Alteration of data sequence is accomplished by addition and elimination of nested resonators in the geometric structure. The tag is capable to encode 10 bits of data and covers spectral range from 3.6 to 15.6 GHz. The formulated structure demonstrates polarization insensitive characteristic. The data encoding structure is analyzed and optimized for different substrates that are, Rogers RT/duroid/5880, Rogers RT/duroid/5870, and Taconic TLX‐0 over the miniaturized footprint of 22.8 × 16 mm². The presented tag is robust, novel, compact, and flexible exhibiting a stable response to impinging electromagnetic waves at various angles of incidence.